Ver el tamaño total de varios archivos seleccionados en OSX

Seleccionar los archivos deseados y pulsar la combinacion de teclas: "⌘"+"⌥"+"I"

Desactivar el ucs auto face selection en el autocad 2013

Al hacer snap cambia la posicion del UCS a la cara selecionada del objeto. La variable de esta opcion es UCSDETECT, poniendola a 0 se quita. O bien es tan simple como pulsar la tecla F6.

Ejemplo de reglas udev

Este es el contenido de mi archivo de reglas para varios dispositivos usb

# cat /etc/udev/rules.d/50-usb-serial.rules

SUBSYSTEMS=="usb-serial",DRIVERS=="cp210x",ATTRS{port_number}=="0",SYMLINK+="obd15a"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", ATTRS{serial}=="A9U9DF7V", SYMLINK+="obd"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", ATTRS{serial}=="00000000", SYMLINK+="sim-ecu"

Para ello:

# sudo udevadm info -q path -n /dev/ttyUSB4
/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/ttyUSB4/tty/ttyUSB4

# sudo udevadm info -a -p /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/ttyUSB4/tty/ttyUSB4
 
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
 
  looking at device '/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/ttyUSB4/tty/ttyUSB4':
    KERNEL=="ttyUSB4"
    SUBSYSTEM=="tty"
    DRIVER==""
 
  looking at parent device '/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/ttyUSB4':
    KERNELS=="ttyUSB4"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="cp210x"
    ATTRS{port_number}=="0"
 
  looking at parent device '/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0':
    KERNELS=="5-1:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="cp210x"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="00"
    ATTRS{bInterfaceProtocol}=="00"
    ATTRS{modalias}=="usb:v10C4pEA60d0100dc00dsc00dp00icFFisc00ip00"
    ATTRS{supports_autosuspend}=="0"
    ATTRS{interface}=="CP2102 USB to UART Bridge Controller"
 
  looking at parent device '/devices/pci0000:00/0000:00:1d.3/usb5/5-1':
    KERNELS=="5-1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="80"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="53123"
    ATTRS{idVendor}=="10c4"
    ATTRS{idProduct}=="ea60"
    ATTRS{bcdDevice}=="0100"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="5"
    ATTRS{devnum}=="2"
    ATTRS{version}==" 1.10"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Silicon Labs"
    ATTRS{product}=="CP2102 USB to UART Bridge Controller"
    ATTRS{serial}=="0001"
 
  looking at parent device '/devices/pci0000:00/0000:00:1d.3/usb5':
    KERNELS=="usb5"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="55"
    ATTRS{idVendor}=="1d6b"
    ATTRS{idProduct}=="0001"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="5"
    ATTRS{devnum}=="1"
    ATTRS{version}==" 1.10"
    ATTRS{maxchild}=="2"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.32.atom.mh.01 uhci_hcd"
    ATTRS{product}=="UHCI Host Controller"
    ATTRS{serial}=="0000:00:1d.3"
    ATTRS{authorized_default}=="1"
 
  looking at parent device '/devices/pci0000:00/0000:00:1d.3':
    KERNELS=="0000:00:1d.3"
    SUBSYSTEMS=="pci"
    DRIVERS=="uhci_hcd"
    ATTRS{vendor}=="0x8086"
    ATTRS{device}=="0x27cb"
    ATTRS{subsystem_vendor}=="0x8086"
    ATTRS{subsystem_device}=="0x574d"
    ATTRS{class}=="0x0c0300"
    ATTRS{irq}=="16"
    ATTRS{local_cpus}=="f"
    ATTRS{local_cpulist}=="0-3"
    ATTRS{modalias}=="pci:v00008086d000027CBsv00008086sd0000574Dbc0Csc03i00"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""
 
  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

La parte que nos interesa es:

KERNELS=="ttyUSB4"
SUBSYSTEMS=="usb-serial"
DRIVERS=="cp210x"
ATTRS{port_number}=="0"

Y si es necesario (como ha sido mi caso):

ATTRS{serial}=="0001"

Con esto hacemos un archivo de reglas en /etc/udev/rules.d llamado "50-usb-serial.rules" con el siguiente contenido

SUBSYSTEMS=="usb-serial",DRIVERS=="cp210x",ATTRS{port_number}=="0",SYMLINK+="aag-weather"

Y ejecutamos el siguiente comando para que se ejecute la regla de forma inmediata

# sudo udevadm trigger

Cansado del mensaje "waiting for /dev to be fully populated."

Como root ejecutar:

udevadm settle --timeout=1

Actualizar python a la version 3.3.2 en raspberry

Abrir un consola y ejecutar los siguientes comandos:

cd ~
wget http://www.python.org/ftp/python/3.3.2/Python-3.3.2.tar.bz2
tar jxf ./Python-3.3.2.tar.bz2
cd ./Python-3.3.2
./configure --prefix=/opt/python3.3.2
make && sudo make install
sudo ln -s /opt/python3.3.2/bin/python3.3 /usr/bin/python332

Con esto queda instalado y compilado

PD Tarda un rato largo en raspberry